Sliding doors are perfect for any home. Their design makes it feel more expansive and classy, not to mention allowing natural light and a great view of the outdoors. However, when the door starts getting stuck, you and your visitors might easily get irritated. Even though patio glass sliding doors seem straightforward, they function due to several moving parts. When any of these parts fail, the door may become hard to open or get stuck at some point. If you are facing this challenge with your patio sliding door, then these tips should get the door back in working order:

Maintain The Track Often

Dust and water from the outdoors or debris from home cleaning activities can accumulate on the track. These will either make it sticky or block it altogether. During summer, humidity and heat also make it hard to keep sliding doors in optimum condition. Wiping it often, especially when everyone is home, is a sure way to keep the door sliding smoothly. You also want to avoid stepping on the track with your shoes to avoid damage over time.

You can start by vacuuming the tracks to remove loose particulates and dust. Then, proceed to wipe down the track with warm soapy water and an absorbent towel to remove more stubborn dirt. Finally, use a butter knife or fork to remove dirt stuck in the smaller crevices and grooves.

Another crucial aspect of track maintenance is lubrication. A thin lubricant film should be on the upper and lower door tracks to keep things moving. If you have vinyl tracks, use a non-stick silicone lubricant. For wooden tracks, candle wax or beeswax works best. Generally, avoid oil-based lubricants as they tend to attract dust, which will make the door stick. Again, do not add lubricants to aluminum sliding doors as they will cause a sticky mess with the door’s rollers. For these, cleaning is sufficient.

Check The Tracks For Breakage

Bent or broken tracks will stop the maneuver of a sliding door, cause it to derail, or even fall, which can be catastrophic. In addition, when the tracks are bent inwards, they will pinch the rollers and make the door hard to slide. You may be able to fix this with a pair of strong pliers, but if the damage is more severe, consider calling a professional to avoid accidents.

Clean The Door Itself

A clean glass sliding door will boost your home’s aesthetic value and provide a great view. However, keeping the door clean is also a crucial part of keeping it moving. Cleaning the glass door reduces the risks of sea mist, dust, and other debris accumulating on the frame and the tracks.

Wipe The Frame

Keeping the door’s frame clean will improve the door’s durability and prevent weathering on the outer frame’s seal. Warm soapy water is sufficient for this job; avoid harsh cleaners as they will wear down your frame with time. If your sliding door is wooden, consider re-varnishing it when the original paint wears off.

Lubricate The Door’s Rollers

Your patio sliding door most likely has between two to four panels, one of which is the sliding door. Rollers underneath it enable the door to slide as you open and close it. However, since the doors are very heavy, the rollers require lubrication to support the door’s motion over time. If your door has been getting harder to open, consider lubricating them. As soon as your rollers get lubricated and the door becomes easier to slide, the rest of its moving parts will also get moving.

If your door is older, its weight and constant motion may have worn out the rollers or broken them. It may be time to determine whether they need to be replaced. If they are just dirty, you can wash, dry, lubricate, and return them. However, if there are signs of damage, consider replacing them to keep your door moving seamlessly. While replacing them, ensure each roller is aligned perfectly for seamless door movement.

Inspect The Doors For Alignment

If you have sliding double doors, slamming, poor installation, and hard knocks can cause rougher sliding over time. Debris or other events in your home, like foundation settling, may also cause the rollers to get misaligned. You can fix this by resetting the roller screws, detaching the doors, and setting them straight from top to bottom.

Adjust Your Door’s Wheels

The whole door might get off the track if your sliding door’s rollers are offline. To fix this, adjust the screws that hold the wheels in place. If you turn the screws clockwise, you will raise the door, while turning them counterclockwise will aid in lowering it. You can compare the sliding door with the other panels to ensure they are evenly aligned.

Replace Worn Weather Stripping

Brittle or broken weather stripping will allow icy gusts or water to enter your home and affect the durability of your door. Replace worn-out weather stripping by removing the old ones with a screwdriver, removing any glue and dust residue, cleaning the area, then installing the new stripping with a plastic adhesive. To ensure the doors slide smoothly, ensure you install them per the manufacturer’s specifications. Also, wipe any excess smudges and adhesive to prevent the doors from getting stuck.

Conclusion

Most of the problems that cause patio sliding doors to stall can be solved by a homeowner. The tips above should keep your sliding patio door moving smoothly and prevent costly issues down the road. These tips will also enable your sliding glass doors to serve you better and look as great as you intended. Remember to carry your sliding door’s specifications and brand when purchasing replacements to ensure you get parts that fit your door perfectly.